Buy now: £31.88
It is used for Night vision lighting. Connecting ways please check the photo in our website, there is no other diagrams.
Specification:
Output Power 80-100mw
Wavelength 532nm
Working Voltage 12v
Working Temperature -10 degrees~+40 degrees
TTL yes(0-20khz)
Laser Shape Dot
Focusable N/A
Material and Color all metal
Beam Diameter:<3mm
Divergency:<1.2mrad
Waterproof N/A
Dimensions head: 30x30x55mm
Currancy board size: 72x36x11.6mm
Feature:
DPSS 532nm green laser module!
it uses 12v voltage to drive!
Pure green ray laser!
The power range of this laser is 80mw-100mw!
With cooling fans! When the temperature of the laser is more than 35°C, the fans starts to work and release the heat.
When the temperature of the laser when is -10°C, it will automatically increase the temperature, which helps the laser get a better working temperature.
If you want to operate this module for a very long time, you must add addtional fans for it to keep its working temperature under 30°C. Without fans, it can work contiunously for 10 minutes. If working Longer than 10 minutes, the laser module's output power will be reduced. Instructions for use:
1. First please connect it with power adapter and then turn on the switch. After powering for 10minutes it will get into a steady state. Switching power supply spacing should be greater than 5 seconds, or easy to damage the laser.
2. When it working, the power board should be placed on the insulator or overhead, otherwise it will bake the laser power. At the same time the laser and the power cable at the power connector can not be subjected to large external force, so as to avoid the internal wiring interrupted of the laser connection.
3. To keep the laser heat dissipated, fasten the laser to a flat metal plate.
Package:
1 x 12V 532nm 80mw-100mw Green Laser Dot Module w Auto Temp Control and TTL 0-20khz
Buy now: £81.99 / £75.99
